Specification Data for LightWild Tiles

Questions? Can't find the information you need?

Please contact us at projects@lightwild.com or call 913-851-3000 and press 1 when the auto-attendant answers during business hours (8 a.m. to 5 p.m. CST, weekdays excluding holidays.)

Note: Most links below load content into new browser windows. If clicking on a link appears to do nothing, check all minimized or open browser windows behind this one for your selected content.

LightWild Tiles 4.0 • Squares
Part Numbers	Dimensions	Data Sheets	CAD Drawings		Photometrics		Wiring Diagrams
Part Numbers	Dimensions	Data Sheets	PDF	DWG	PDF	IES	PDF	DWG
LW-TILE-FLOOR-SQR-4x4-*	4x4 ins (100x100 mm)	PDF	PDF	DWG	•Warm White •Cool White •RGB	•Warm White •Cool White •RGB (Full On)	•Single Color & White LEDs •RGB LEDs	•Single Color & White LEDs •RGB LEDs
LW-TILE-FLOOR-SQR-6x6-*	6x6 ins (150x150 mm)	PDF	PDF	DWG	Use the photometric data for the 4x4 inch (100x100 mm) square as the base data and multiply for the larger square sizes.
LW-TILE-FLOOR-SQR-8x8-*	8x8 ins (200x200 mm)	PDF	PDF	DWG
LW-TILE-FLOOR-SQR-12x12-*	12x12 ins (300x300 mm)	PDF	PDF	DWG

LightWild Tiles 4.0 • Rectangles
Part Numbers	Dimensions	Data Sheets	CAD Drawings		Photometrics		Wiring Diagrams
Part Numbers	Dimensions	Data Sheets	PDF	DWG	PDF	IES	PDF	DWG
LW-TILE-FLOOR-RECT-2x12-*	2x12 ins (55x300 mm)	PDF	PDF	DWG	•Warm White •Cool White	•Warm White •Cool White	•Single Color & White LEDs •RGB LEDs	•Single Color & White LEDs •RGB LEDs
LW-TILE-FLOOR-RECT-2x24-*	2x24 ins (55x600 mm)	PDF	PDF	DWG	Use the photometric data for the 2x12 inch (55x300 mm) rectangle as the base data and multiply for the larger rectangular sizes.
LW-TILE-FLOOR-RECT-2x36-*	2x36 ins (55x900 mm)	PDF	PDF	DWG
LW-TILE-FLOOR-RECT-2x48-*	2x48 ins (55x1200 mm)	PDF	PDF	DWG

LightWild Tiles 4.0 • Circles
Part Numbers	Dimensions	Data Sheets	CAD Drawings		Photometrics		Wiring Diagrams
Part Numbers	Dimensions	Data Sheets	PDF	DWG	PDF	IES	PDF	DWG
LW-TILE-FLOOR-CIRC-6-*	6 in (150 mm) diameter	PDF	PDF	DWG	Consult photometric data for similarly sized square Tiles for the approximation of circular Tile light distributions.		•Single Color & White LEDs •RGB LEDs	•Single Color & White LEDs •RGB LEDs
LW-TILE-FLOOR-CIRC-8-*	8 in (200 mm) diameter	PDF	PDF	DWG
LW-TILE-FLOOR-CIRC-12-*	12 in (300 mm) diameter	PDF	PDF	DWG

Installation Information
LightWild Tile Floor Installation General Instructions • PDF (See wiring diagrams for important additional information.)

*=LED COLOR. Dimensions listed are nominal. See Data Sheets and CAD Drawings for specific dimensions. LightWild Tiles are sealed fixtures with no replacement bulb options, meaning the entire fixture must be replaced if there is a fixture failure. Following LightWild's installation recommendations provides a reasonable means for removing LightWild Tiles if necessary. WARNING: Risk of electric shock. Install all luminaires 10 feet (3 m) or more from a pool, spa, or fountain. Tiles are IP65 rated. Proper drainage required. Do not allow water to collect or stand around installed Tiles. Tiles are not for use in submersible applications. Foot traffic and light utility vehicles (maintenance and landscape carts, golf carts, etc.) only. Not rated for cars and vehicular traffic. The manufacturing process used for LightWild Tiles can occasionally produce slight variations in dimensions quoted on product data sheets, the LightWild Web site, and other product documentation. In final installations, Tiles should be slightly recessed from surrounding surfaces to prevent possible damage to the edges of the glass caused by loads from light utility vehicles or direct impact from sNow plows or shovels as well as to reduce tripping hazards. Installation procedures should include a means to level Tiles vertically or adjust horizontally if necessary to achieve desired results.

*=LED COLOR.

Dimensions listed are nominal. See Data Sheets and CAD Drawings for specific dimensions.

LightWild Tiles are sealed fixtures with no replacement bulb options, meaning the entire fixture must be replaced if there is a fixture failure. Following LightWild's installation recommendations provides a reasonable means for removing LightWild Tiles if necessary.

WARNING: Risk of electric shock. Install all luminaires 10 feet (3 m) or more from a pool, spa, or fountain. Tiles are IP65 rated. Proper drainage required. Do not allow water to collect or stand around installed Tiles. Tiles are not for use in submersible applications.

Foot traffic and light utility vehicles (maintenance and landscape carts, golf carts, etc.) only. Not rated for cars and vehicular traffic.

The manufacturing process used for LightWild Tiles can occasionally produce slight variations in dimensions quoted on product data sheets, the LightWild Web site, and other product documentation. In final installations, Tiles should be slightly recessed from surrounding surfaces to prevent possible damage to the edges of the glass caused by loads from light utility vehicles or direct impact from sNow plows or shovels as well as to reduce tripping hazards. Installation procedures should include a means to level Tiles vertically or adjust horizontally if necessary to achieve desired results.