LightWild Tiles

Unique, impactful lighting fixtures for in-grade floor and ground applications

An end-to-end solution from controls to SSL fixtures. Use indoors or outdoors. Several sizes and shapes!

LightWild Tiles deliver unique accent lighting effects from ground levels. They are available in squares, linear rectangles, and circles. Standard sizes range from narrow 2x12 inch (55x300 mm) rectangles to 12x12 inch (300x300 mm) squares. Stainless steel housings, frosted tempered glass lenses, and high slip ratings (co-efficient of friction) ensure that every size Tile can endure pedestrian foot traffic.

Now in version 4.0, LightWild Tiles include:

NEW low-iron, frosted tempered glass lenses for brighter, cleaner lighting effects
NEW higher lumen surface-mount LEDs
NEW passivated stainless steel housings and sealants for even more durability in the field
High slip ratings (co-efficient of friction)
Warm white (3000K), cool white (4000K), and RGB LEDs
UL (2108 and 1838) wet listings

Additionally, LightWild Tiles feature a 3,000-pound (1,360 kg) load rating, enabling them to withstand traffic from light utility vehicles such as maintenance carts and golf carts. (Not rated for cars and vehicular traffic.) Tiles have been installed with a variety of materials such as concrete, pavers, hardwood and simulated wood flooring, and ceramic and marble tiles and in numerous settings such as patios, lobbies, sidewalks, pathways, and landscaping.

Includes Support and Junction Boxes to Ease Installation

Every LightWild Tile is available with an accompanying support box that includes built-in conduit openings and screw mounting holes for securing a Tile's place in the installation environment during the construction phase. In addition, a junction box that fits inside the support box is supplied with dielectric grease to ensure a water-tight connection to branch cables.

LightWild Tiles 4.0 • Squares
Part Numbers	Dimensions	Data Sheets	CAD Drawings		Photometrics		Wiring Diagrams
Part Numbers	Dimensions	Data Sheets	PDF	DWG	PDF	IES	PDF	DWG
LW-TILE-FLOOR-SQR-4x4-*	4x4 ins (100x100 mm)	PDF	PDF	DWG	•Warm White •Cool White •RGB	•Warm White •Cool White •RGB (Full On)	•Single Color & White LEDs •RGB LEDs	•Single Color & White LEDs •RGB LEDs
LW-TILE-FLOOR-SQR-6x6-*	6x6 ins (150x150 mm)	PDF	PDF	DWG	Use the photometric data for the 4x4 inch (100x100 mm) square as the base data and multiply for the larger square sizes.
LW-TILE-FLOOR-SQR-8x8-*	8x8 ins (200x200 mm)	PDF	PDF	DWG
LW-TILE-FLOOR-SQR-12x12-*	12x12 ins (300x300 mm)	PDF	PDF	DWG

LightWild Tiles 4.0 • Rectangles
Part Numbers	Dimensions	Data Sheets	CAD Drawings		Photometrics		Wiring Diagrams
Part Numbers	Dimensions	Data Sheets	PDF	DWG	PDF	IES	PDF	DWG
LW-TILE-FLOOR-RECT-2x12-*	2x12 ins (55x300 mm)	PDF	PDF	DWG	•Warm White •Cool White	•Warm White •Cool White	•Single Color & White LEDs •RGB LEDs	•Single Color & White LEDs •RGB LEDs
LW-TILE-FLOOR-RECT-2x24-*	2x24 ins (55x600 mm)	PDF	PDF	DWG	Use the photometric data for the 2x12 inch (55x300 mm) rectangle as the base data and multiply for the larger rectangular sizes.
LW-TILE-FLOOR-RECT-2x36-*	2x36 ins (55x900 mm)	PDF	PDF	DWG
LW-TILE-FLOOR-RECT-2x48-*	2x48 ins (55x1200 mm)	PDF	PDF	DWG

LightWild Tiles 4.0 • Circles
Part Numbers	Dimensions	Data Sheets	CAD Drawings		Photometrics		Wiring Diagrams
Part Numbers	Dimensions	Data Sheets	PDF	DWG	PDF	IES	PDF	DWG
LW-TILE-FLOOR-CIRC-6-*	6 in (150 mm) diameter	PDF	PDF	DWG	Consult photometric data for similarly sized square Tiles for the approximation of circular Tile light distributions.		•Single Color & White LEDs •RGB LEDs	•Single Color & White LEDs •RGB LEDs
LW-TILE-FLOOR-CIRC-8-*	8 in (200 mm) diameter	PDF	PDF	DWG
LW-TILE-FLOOR-CIRC-12-*	12 in (300 mm) diameter	PDF	PDF	DWG

Installation Information
LightWild Tile Floor Installation General Instructions • PDF (See wiring diagrams for important additional information.)

*=LED COLOR. Dimensions listed are nominal. See Data Sheets and CAD Drawings for specific dimensions. LightWild Tiles are sealed fixtures with no replacement bulb options, meaning the entire fixture must be replaced if there is a fixture failure. Following LightWild's installation recommendations provides a reasonable means for removing LightWild Tiles if necessary. WARNING: Risk of electric shock. Install all luminaires 10 feet (3 m) or more from a pool, spa, or fountain. Tiles are IP65 rated. Proper drainage required. Do not allow water to collect or stand around installed Tiles. Tiles are not for use in submersible applications. Foot traffic and light utility vehicles (maintenance and landscape carts, golf carts, etc.) only. Not rated for cars and vehicular traffic. The manufacturing process used for LightWild Tiles can occasionally produce slight variations in dimensions quoted on product data sheets, the LightWild Web site, and other product documentation. In final installations, Tiles should be slightly recessed from surrounding surfaces to prevent possible damage to the edges of the glass caused by loads from light utility vehicles or direct impact from sNow plows or shovels as well as to reduce tripping hazards. Installation procedures should include a means to level Tiles vertically or adjust horizontally if necessary to achieve desired results.

*=LED COLOR.

Dimensions listed are nominal. See Data Sheets and CAD Drawings for specific dimensions.

LightWild Tiles are sealed fixtures with no replacement bulb options, meaning the entire fixture must be replaced if there is a fixture failure. Following LightWild's installation recommendations provides a reasonable means for removing LightWild Tiles if necessary.

WARNING: Risk of electric shock. Install all luminaires 10 feet (3 m) or more from a pool, spa, or fountain. Tiles are IP65 rated. Proper drainage required. Do not allow water to collect or stand around installed Tiles. Tiles are not for use in submersible applications.

Foot traffic and light utility vehicles (maintenance and landscape carts, golf carts, etc.) only. Not rated for cars and vehicular traffic.

The manufacturing process used for LightWild Tiles can occasionally produce slight variations in dimensions quoted on product data sheets, the LightWild Web site, and other product documentation. In final installations, Tiles should be slightly recessed from surrounding surfaces to prevent possible damage to the edges of the glass caused by loads from light utility vehicles or direct impact from sNow plows or shovels as well as to reduce tripping hazards. Installation procedures should include a means to level Tiles vertically or adjust horizontally if necessary to achieve desired results.